Time for a big old update

Its been over a month since the last time I put finger to keyboard, so I thought it was about time for a big old update on here. Whats new in 2013 then?

The Mekon

the mekonI’ve ditched the idea of moulding him so he’s nearly finished. I went through a week of hell when his head just refused to dry properly after being sprayed. The paint was really tacky and I didn’t know if it was the cold, I had sprayed too thick (a typical stunt I pull) or the can hadn’t been shaken properly. Fortunately it has dried (after much hot air blown over it) and is ready for painting along with the body and the floaty base. Speaking of which, it’s nearly finished.

the mekonI’ve gone for a more round base rather than the more boat-hull shape for two reasons. Firstly because I was struggling to find a way to get it exactly the right shape on either side without loads of working out (yes I’m being lazy), secondly a piece fell into my hands that is almost exactly what I needed. Its round, needed a bit of filling at one end and a flat bit on the top. Other than that it’s perfect. I drilled down the middle, fitted a brass rod that can be removed and drilled into an old silver dish (I think it was a small ashtray) to act as the base. The hollow in the hemisphere is now filled with resin and ready to be sanded and painted.


Plodding on. Here we have a herd of Cthulhu’s in their natural habitat.

cthulhuLeft to right is cast iron, brass, the little red lump next to the brass is the head of a copper casting (I will explain), aluminium (polised), aluminium (un-polished) and just off to the side is copper.

cthulhu idolJust after the New Year I ordered some new materials (copper, brass, aluminium and bronze) and when they arrived I set to on the brass first.
It came out really well! Huzzah!

So, brimming with confidence, I went for copper next and unfortunately the fates conspired against me and the mould finally gave up. Also for some reason the backfill resin I mixed up didn’t set. One problem I could have dealt with, but the two together meant I ended up with holes oooooozing out black filth that is still seeping out of the casting, parts of it are floppy and the whole thing is a just a nasty mess. That black goop is just dribbling nonstop and I’m starting to think its infinite.

Fortunately I was a scout (be prepared and all that) so had a backup mould ready to go. I did a couple of aluminium castings to test it out and they came out perfectly so I’m back on track after a slight hiccup. I’m actually shocked that the first mould lasted as long as it did but as a backup for this backup I’ve bought a trial pack of Dragon Skin which is supposed to be great for mould making but I need a few hours to work up the skin in stages.

I’ve just got some business cards on order from Moo which will go with displays in shops and Im getting a shop on Etsy finally in place. Now I just need another string to the bow in terms of products.

Necron skull

Still sitting waiting to be worked on, I can’t do anything to this inside as I need to be outside to use my power sander. Wait… have I blogged about this project? Hmmmmm.


Before Christmas I was having some form of conversation with Duncan, the chap who runs zombiemedia.co.uk and a gag came up about Cthulhu doing a hula (I can’t remember the exact details) but this is his response which is available on qwertee.com.

I’m now in the process of sculpting a version which, if i can cast, I am hoping will be available at some point in the future.

Future projects

I’ve had a couple of requests for commissions which could be going down later this year and I’m dying to try out some clear casting. I’ve got some ideas on the go but really need to finish some projects off first or is that boring?

4 thoughts on “Time for a big old update

  1. Henry McKeen

    Wow, I didn’t know Duncan was an artist. That is an awesome shirt!

    Are you no longer going to mold the Mekon because of his tiny appendages and the open spaces beneath his legs?

  2. Kirkd Post author

    I kind of gave up on the Mekon because I didn’t think I would have time to fiddle with him but, yes, the mucking around with his bits was causing me a few headaches.

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload the CAPTCHA.