Category Archives: Pumpkin Head

Halloween 2012

The Dort was off at a sleepover and trick or treating so we didn’t do a huge amount for Halloween this year, I also missed posting this for the actual date but here is the final Halloween sculpture piece.

Halloween SculptureHalloween Sculpture

It was inspired by an original sketch by Chris Ryniak who also has a tumblr account which has now taken up residence in my Google reader.

What this whole thing has taught me is that I can sculpt stuff fast when I set my mind to it and that I need to do something about taking better photos of my work.

halloween window display Due to not having a front garden or anything which can be filled with grotesque figures, we usually pop a couple of things in the window and the Dort and I make something every year as part of our build up to the 31st, she didn’t finish hers in time but we did put both of our new pieces in the window. Her cat is also based on a sketch by Chris and I’ll publish a pic when she finishes painting it. The eyes light up green when a button is turned on at the back and was built with half an old torch (cut up for the button), some green LED’s and a couple of decorative glass pebbles for the front of the eyes.

Something wicked this way comes

Its only a few days to Halloween and for the last couple of years the Daughter and I have sculpted something for our window display as a way of having some fun and creating something unique. We’ve done tiny pumpkins, ghosts and she did a witch last year while I started the Jezail sculpture (which didn’t get finished anywhere near Halloween unless you count the following years). This year she wanted to do something a bit more complex so (leaving it until the last minute) she splashed around in Google for a bit and found a cat sketch by Chris Ryniak, so I went for another one of his sketches as inspiration.

To make it more interesting I thought of fitting a bulb into the top of the candle on one and we’ve talked about some glowing eyes for the cat. Nothing like making it as challenging as possible… Also the Daughters never done soldering before I thought this would be a good time to learn, she’s 10 so thats old enough to start hot-wiring stuff.

So Saturday consisted of harvesting as much of the bits needed from town. 3 packs of milliput to build the armature with, some aluminium tubes to run the wires through so I don’t have to bake the wires in the oven, a pack of mixed LED’s, a load of resistors, a flickering bulb from a £1 Halloween display, some wire, a couple of switches, batteries and I’ve even treated myself to a new soldering iron.

Sorry for the lack of “in build photos” but its been a bit of a rush to get this ready in time for the 31st. To start I cut up a couple of small MDF boxes to act as bases and housing for the batteries and wiring, drilled out holes and fitted the alu tubes. The daughters has it right up the middle while mine has a bend in the side as the legs are spread apart. Two packs of milliput then got spread all over them to act as keying for the sculpey. Baked for 20 mins to set the Milliput.

Next up was the circuits. In my shopping I also picked up a test breadboard for the wiring and two blow LED’s later I had my circuits worked out.

At this point it was sculpting time. The Daughter was packed off to bed a bit later and I carried on while the missus subjected me to “house nation”… How did that pass for music?

Sometime around 11pm, with my eyes burning, my back cracking and my ears bleeding, I had my basic shape blocked out.

Day two begins and as its raining I think we will be staying in.