Category Archives: Magneto

Magnetic goddess

Following on from the finishing of Freyja last week, I finally had a chance to put some hours into a couple of projects to get them nearer to finishing.

Magneto

Magneto helmetThe main one is that my Magneto helmet is just about done. I used Ford Purple velvet and Peugeot diablo red (both Halfords brand) for the paint colours with a heavy coating of lacquer to protect it. Thinking about it the car bodyfiller, the spray putty, the sandpaper, the masking tape and the knifing putty all came from Halfords. The insides has been painted with hammered finish metal paint (not from Halfords) to give it a raw metal look and the stand is made from a potpourri holder I found in a shop in town. It’s metal and pretty tough so I just painted it copper and weathered it with some metal polish. The paint that fell onto it while painting the helmet just adds to the weathering.

Magneto helmetI’m going to polish the helmet with some car wax when I get a chance and I need to tidy up some of the paintwork first but overall I’m pretty pleased with how it came out. The damn thing is heavy and needs padding inside. Plus as I can’t wear my glasses with it on, I look like a mole when I wear it…

Freyja

Freyja statueThe other thing ticked off is that Freyja is now photographed.

I’m now selling my wares through Pyewackett and Pecke which is stacked to the gills with some of the most bizarre stuff I’ve seen online in a long time and is well worth a look round. I’m really impressed with what people’s minds can come up with and I’m also please to see theres an entire category devoted to Cthulhu and I currently seem to have a huge chunk of the idols section with my Norse gods (and Cthulhu of course).

Right, time to update my deviantart account with the new photos. I always feel slightly unclean after being on there…

Projects of future past

Hey look, its another reeeeeaaaally long gap between two blog posts. Ho hum… One of the projects I’ve been working on I had hoped to get finished by this weekend as it sees the release of X-Men: Days of future past and I was hoping to tie in a bit. Yet in my own typical fashion, I’m late to the party. So while the rain is coming down (yup, its another bank holiday) I can’t get outside to paint so instead I’m doing admin and catching up on some other bits n bobs.

Magneto’s helmet

This little item is what I’ve been trying to finish. Based on a mashup of the X-Men: First Class helmet and the more flamboyant comic one, I started building this as a test that got carried away. I’ve been itching to try out Pepakura for years now but its PC based so had to make do with grabbing time on other peoples computers when possible. Not the best way. But around the end of April I suddenly woke up in the middle of the night with Wineskin in my head (yeah I actually do things like that). Wineskin is an OSX app which runs PC software in a wrapper and I’ve used it in the past to run things like Star Trek: Elite Forces and I don’t know why I didn’t think of it sooner. Pepakura, for those not in the know, is a paper folding app that gobbles up 3d files and spits them out as printouts you cut up and glue together to make things. The prop industry has been using it for a while to kick off projects and I figured it was time for me to have a go.

A quick hunt online got me a few different versions of Magneto’s helmet and using the free version of Pepakura (viewer) I tried a few out. I chopped and changed around some of the details and set to making my own with the intention of not actually finishing it.

Yeah…

magneto helmet

So one fine Saturday morning I sat in the cellar hacking up paper and gluing it together.


magneto helmet

magneto helmet

I then layered fibreglass into it, along with some matting, some more resin and then started to coat the whole thing in car body filler. You know, theres something bad ass about putting a big helmet on, even when its not finished. I can’t see beyond the end of my nose without the glasses on but I feel awesome.


magneto helmet

Layers of filler, paint, lots of sanding (thankfully the rain washed the dust away from the garden) and more paint followed by erm… oh yeah… sanding.


magneto helmet

I kept coming across weak spots from the first slushing so a lot of time was spent gouging out these parts and filling then getting back in the garden to sand.


magneto helmet

I had some paper templates to measure around the edge and to get the raised lip I blocked out the negative space with plasticine and then mixed up some Rondo to brush in. For those not in the know, Rondo is a mix of car body filler and fibreglass resin and takes its name from Bondo (a brand of car body filler) + resin. A word of warning, this stuff stinks. It takes two of the most evil smelling products on the planet and merges the stench. Even with a mask on it was vile. On the plus side, it brushes in nicely and flows well.


magneto helmet

Once the raised edge was in place I just removed the plasticine and sanded/carved it neater. A little tip that I came up with, my plasticine was rock solid and rather than spend ages kneading it, I popped it into a plastic bag then sunk it into hot water. The plasticine softened up nicely and was easy to press into place.


magneto helmet

I spent ages carefully examining the surface for marks and pin holes but sometimes just running your hands over it… lovingly… caressing every surface… ahem… helps you to find things that are not quite right. I managed to find a couple of minor dimples which couldn’t obviously be seen.


magneto helmet

The crest is sculpted from milliput and then drilled and pinned to the head. I’ve got the paint ready for the final colouring but sadly its not ready in time for me to wear to the premiere of Days of future past unless I time travel like in the story. Of course this isn’t a bad thing as I wouldn’t be able to see or hear anything while wearing it.

Frejya

Freyja Statue
Freyja
Huzzah! She’s done. I’m in the process of cleaning her up and should be ready to mould later in May (not much time left is there?)

She’s gone through around three different bodies and I’ve lost track of the number of heads she’s had. Around her base she has a cauldron, a boar (Hildisv√≠ni) and two cats (more like Lynx’s than puddy tats), she wears a cloak of falcon feathers and a necklace (Br√≠singamen) and she has a large drinking horn in her hands.

She will be available via Etsy and Sacred Earth in the near future.

Seals

These seals are going like hot cakes. So far I’ve done versions for bookmarks, fridges, computers, LARPing and even a badge which was actually quite hard to get the pin into place after the resin has set.

FE Suffolk

Lastly, I am giving my annual talk at FE Suffolk this Tuesday (27th May) where I will be talking about my experiences with three.js, a javascript 3D library.